Spray paint does not need months like oil paints. I think that is primarily a concern because artist oil paints take a really really long time to properly dry. This paint if it is good and cured or hardener was added might sand really nice, not like uncured alkyd paint that is soft and balling up and cloggin sand paper. It's generally considered okay to put oils over acrylics, just not the other way. The urethane topcoat could be an economical type like TCP Global, I would try this route before stripping it right down. If you're working with lead paint, do not sand it, according to Rustoleum's website. If the current finish is glossy, sand it with fine sandpaper. This also removes old, chipping paint, if applicable. I would test 1 panel or area, and see if it will be okay with a 2 k urethane primer/sealer, might be surprised, then shooot your urethane topcoat over this.ĭid the Rustoleum, have a generic enamel hardener added before it was sprayed on, if it did should be a different animal than without. Rust-Oleum Universal is an all-surface paint that can be applied to wood, metal, wicker or plastic furniture without a primer. Step 2 Remove loose rust with a wire brush, steel wool or a scraper.
Or get out the Meguires and polisher it would come back. How about sanding this paint and shootin on a sealer and go with urethane on top. What is so bad about it? it looks a lot better than a lot of BC/CC and AE paint jobs I have seen on here and elsewhere. Apply a thin coat with a brush or roller. I do not buy that enamel will not bond with another paint system, if certain caveats have been fulfilled, meaning the paint is super cured and solid, sand it down or do 1 panel and see how that goes first. Rated as a superior spray paint over other Rust-Oleum general purpose paint 2X Ultra Cover provides you with excellent coverage in a smooth durable finish. Prime and then paint with a Rustoleum metal primer and paint, respectively. Apply 2 or more light coats a few minutes apart, then allow 15 minutes to dry. Spray directly onto the rust on bare metal, no need to sand.
I have used many things over alkyd enamels over the years including 2 k urethane sealers and surfacers, lacquer based primers and urethane topcoats etc. Spray in a steady back-and-forth motion, slightly overlapping each stroke. Rust-Oleum Stops Rust Rust Reformer instantly converts rust to a non-rusting surface.
0 kommentar(er)
